5 Tips for Battling Mold and Mildew in Your Home

  1. The best way to fight mold and mildew is to avoid it altogether. Be proactive. One of the rooms in a home that most commonly attracts mold and mildew is the bathroom since it is often a moist environment. Reduce humidity in these rooms by ventilating the space effectively. When using the shower or taking a bath, be sure to open any windows and doors to allow air the circulate and disperse. Also, use any vents or exhaust fans you have installed to remove steam and prevent condensation on walls and other areas. Wipe and squeegee down your shower curtain and tiles after each shower use. Taking these steps will provide you with great results and limit mold an mildew development. significantly.
  2. Mold isn’t just found in bathrooms. It can also become an issue on your roof where it is harder to spot! Once you do notice it, remove it as soon as possible so that it cannot form a new roof covering. You can remove it by using one cup of bleach in a gallon of warm water. To prevent future mold, install zinc strips and nail them on. Another way to prevent mold is to remove the environment it prefers which is warm, shaded, damp spots. Cut back any low hanging trees and branches that may be fostering the development of mold on your roof.
  3. When emoting mold in your home, you may choose to buy a strong, commercial brand cleaner. However, you can also make your own DIY product that is just as effective and much cheaper! Similar to how you handled mold on the roof, mix a cup of bleach with a gallon of water that is hot this time. Wear rubber gloves, an apply the mixture to the moldy area with a sponge. Work from the top down, always. Let the mixture sit so that it can do its work and then rinse it off with the hottest water you can get to come out of your tap. Handheld shower heads are ideal for this project because you will be able to comprehensively rinse the entire shower.
  4. Clean mold in-between tiles by scrubbing the grout. Often mold will get stuck in those hard to reach places. A professional may come in with a Dremel rotary tool, however you can do the same job n your own. All you need is an old toothbrush and some hydrogen peroxide. Saturate the brush in the hydrogen peroxide then scrub the grout lines to reveal, mold free shower.
  5. Finally, be sure to know when mold is out of your hands. Some mold types are extremely dangerous and need to be cleaned properly. In this case, you will need to hire a professional to do the job right. Black mold for example can pose serious health concerns and risks if not handled safely and appropriately.

When battling mold and mildew using the right products and having a proactive approach can make a huge difference. While many small mold and mildew problems can be handled on your own, be sure to know when to call a professional to handle the problem and also to explain to you why geothermal heating and cooling works for new home construction. All of these tips will come in handy and help you to keep your home clean, safe and mold free.

Leave a Reply

Your email address will not be published. Required fields are marked *